1. Normally closed fireproof glass window: in addition to the required fireproof performance, the normally closed fireproof glass window is also required to have the functions of active closure and sequential closure. During the installation of fire-proof glass windows, the verticality of the front, rear, left and right shall be corrected with a level ruler or a hanging line method, so as to be horizontal, vertical and the same height. These supporting functions can not be ignored, otherwise many hidden dangers will be left. At present, most fireproof glass windows are used in China, mainly because the parts used are simple mechanical products, simple manufacturing equipment and low cost. However, the normally closed fireproof glass window has many defects:
(1) the fire-proof glass windows shall be scattered in the walkways, stairs and lobby, and the fire-proof glass windows shall be closed frequently, which will bring unnecessary trouble to the normal passage. In order to facilitate access, many places are open.
(2) because this place is usually a place where people often walk around, with heavy traffic and doors often open, the fireproof glass window and its hardware will inevitably be often damaged, especially the door closer. Once the viewpoint when the device is turned on is larger than the observation range, the function of active shutdown cannot be performed.
(3) when the engineering inspection is put into use, the door closer is usually debugged to close the door. However, in case of fire, the impact force of hot air expansion will produce a certain pressure difference on both sides of the fireproof glass window. Adjusting the door closer makes it difficult to fix the fireproof glass window In this way, fireworks will enter the public lobby, firefighters cannot enter the lobby to save people, and it will become impossible to escape with closed stairs.
2. Normally open fireproof glass windows: in the specification, normally open fireproof glass windows use three "should" words continuously, and strictly emphasize the addition of signal response function on the basis of normally closed fireproof glass windows. In addition, one of these three basic skills is required. At present, most of the fireproof glass windows on the market have the functions of "self sealing" and "signal response", and have short and reliable functions, which has been confirmed by many fire cases. Because the fireproof glass window cannot be closed, the fire spreading at the scene cannot be isolated.
Article source: fireproof glass window http://hanzhicheng.cn/
05-04
What are the problems of composite fireproof glass in fire fighting
Some supervisors mistakenly think that the door made of fireproof glass is the fireproof door, the partition made of fireproof glass is the fireproof glass partition, and the window made of fireproof
04-12
Fireproof glass door: how to ensure that the fireproof door can play a role in critical times
How to ensure that the fire door can give full play to its ideal effect in critical time?1. Select appropriate typesAccording to the relevant specific introduction of fire doors, we can know that at t
02-17
Where is the fireproof glass generally installed
(1) the fireproof glass is generally installed on something. It may not be checked from time to time before installation. If the warpage, unsightness and glass hazards of the window edge and window ar
10-30
How to distinguish the quality of single fireproof glass?
1. Equipment conditions:No matter how to make a single piece of fireproof glass, it can't be done without some equipment, so if the manufacturer doesn't have the equipment, it can't mak