(1) the fireproof glass is generally installed on something. It may not be checked from time to time before installation. If the warpage, unsightness and glass hazards of the window edge and window are inherited due to careless care, it can be installed from time to time only after it is restored.
(2) when the fire-proof glass is generally installed on something, it must be leveled with an intersecting ruler or calculated by the hanging line method to solve the difference in horizontal, vertical and environment.
(3) fireproof glass is generally installed on something, and the window edge may not be integrated with the structure. Wood or iron parts are used to splice with the wall. The bronze window is installed beside the rear window, and the space between the rear window and the wall may not be poured with Zhang mud mortar, and it can be selected only after covering for hours.
(4) the fireproof glass is generally installed on something. The position of the installation hole in the center of the structure should be biased to make the center of the structure meet the requirements and hard, and the treatment is innovative.
(5) during the installation of flame-proof glass, the density and strength of the grid should not only be flattened, but also hidden after positioning. Fill the grid with flame-proof cotton, and then seal the correction strip.
Article source: fireproof glass http://hanzhicheng.cn/
05-04
What are the problems of composite fireproof glass in fire fighting
Some supervisors mistakenly think that the door made of fireproof glass is the fireproof door, the partition made of fireproof glass is the fireproof glass partition, and the window made of fireproof
04-12
Fireproof glass door: how to ensure that the fireproof door can play a role in critical times
How to ensure that the fire door can give full play to its ideal effect in critical time?1. Select appropriate typesAccording to the relevant specific introduction of fire doors, we can know that at t
02-17
Where is the fireproof glass generally installed
(1) the fireproof glass is generally installed on something. It may not be checked from time to time before installation. If the warpage, unsightness and glass hazards of the window edge and window ar
10-30
How to distinguish the quality of single fireproof glass?
1. Equipment conditions:No matter how to make a single piece of fireproof glass, it can't be done without some equipment, so if the manufacturer doesn't have the equipment, it can't mak