中文
EnglishApplication place and precautions of single piece cesium potassium fireproof glass
Monolithic cesium potassium fireproof glass is a kind of high cost-effective fireproof glass with one hour fire resistance and strong processability. Single piece cesium potassium fireproof glass can be processed into sandwich type: single piece fireproof glass + PVB adhesive film + glass substrate; Hollow type: single piece cesium potassium fireproof glass + gas layer + other glass substrates. Single piece cesium potassium fireproof glass with various thicknesses between 5-19mm can be used in different places of use, and can be reprocessed into the following products:
1. Fireproof glass door: the single piece of cesium potassium fireproof glass is made of steel or stainless steel profile after processing, and the overall fire resistance rating can be selected from three types of a, B and C, which is satisfactory to the fire inspection requirements.
2. Fireproof glass partition: the profile is combined with glass, which is used as a non load-bearing wall. It has the functions of fire prevention and daylighting, transparent and bright hall, and creates a large space vision.
3. Fireproof glass window: that is, fireproof window. The fireproof window processed by single piece cesium potassium fireproof glass is generally non insulated fireproof window, which can be processed and formed with steel or aluminum alloy profiles. It is satisfied with gb2008 specification for fireproof window, and is applicable to refuge rooms of high-rise buildings, industrial plants, commercial and public places, etc.
4. Fire barrier in the atrium of the building, ceiling, floor, ceiling, curtain wall, etc. required to have fire protection function.
Precautions for use of single piece cesium potassium fireproof glass:
1. Single piece fireproof glass is classified as non insulated class C fireproof glass and cannot be used in places with clear provisions on heat insulation fire and heat radiation.
2. After the single piece of cesium potassium fireproof glass is processed and formed, it cannot be polished, cut, drilled and heat treated, otherwise it will affect the internal structure and fire resistance of the glass. The fireproof glass that needs to be processed should recognize the requirements of scale, shape, opening, edging and so on with the seller when placing an order.
3. Single piece cesium potassium fireproof glass cannot be used in the fire compartment with sprinkler system. Composite fireproof glass (with heat insulation function) should be used here.
Article source: monolithic fireproof glass http://hanzhicheng.cn/
-
05-04
What are the problems of composite fireproof glass in fire fighting
Some supervisors mistakenly think that the door made of fireproof glass is the fireproof door, the partition made of fireproof glass is the fireproof glass partition, and the window made of fireproof
-
04-12
Fireproof glass door: how to ensure that the fireproof door can play a role in critical times
How to ensure that the fire door can give full play to its ideal effect in critical time?1. Select appropriate typesAccording to the relevant specific introduction of fire doors, we can know that at t
-
02-17
Where is the fireproof glass generally installed
(1) the fireproof glass is generally installed on something. It may not be checked from time to time before installation. If the warpage, unsightness and glass hazards of the window edge and window ar
-
10-30
How to distinguish the quality of single fireproof glass?
1. Equipment conditions:No matter how to make a single piece of fireproof glass, it can't be done without some equipment, so if the manufacturer doesn't have the equipment, it can't mak